Changing the Receiver Tone
-------------------------- 

» Step 1 - Depress program button (don’t release) and switch receiver on.

» Step 2 - Keep the program button depressed for 5 seconds until all LEDs light simultaneously but do not release the program button. After a further 5 seconds all LEDs will go out simultaneously.

» Step 3 - Release the program button Let go of program button, the receiver will "chirp" once, signifying that it has entered entered into “Tone Choice Mode”

» Step 4 - Tap the program button to change the tone. Tapping the program button will cycle through a choice of 15 tones, with the receiver sounding a different tone every time the button is pressed .

» Step 5 - Switch the receiver OFF to save the last "chirped" tone and exit the “Tone Choice Mode”.

Save This Document 
------------------

If you are displaying this file in your browser, use the 'Save As' (Internet Explorer) or 'Save Page As' (Firefox) on the File Menu.
Click the back button on your browser to return to the ATT Website.

Print This Document
------------------- 

If you are displaying this file in your browser, use the 'Print' option on the File Menu of your browser.
Click the back button on your browser to return to the ATT Website.


Advanced Technology Tackle Ltd
http://www.attackle.com