The ATTx V1 System > Controls
The Transmitter1) Jack Plug - Available in 2.5mm or 3.5mm depending on alarm.
2) Transmitter Stalk
3) Battery Housing
The micro-sized transmitter can transmit pulses to the receiver over a range of up to 250 meters (subject to atmospheric conditions).
V1 transmitters are powered by two CR1025 button cells.
V2 transmitters are powered by one GP11A battery.
V2 transmitters are powered by one GP11A battery.
The transmitter has no power impact on the alarm it is plugged into so it does not affect the battery life of the alarm.
The Receiver
4) 3 Position Switch - Off, On/Sound and Vibrate
5) LED's - 5 different colours or all in 1 colour
6) Volume Dial - From zero volume to maximum
7) Receiver Speaker
8) Programme Button (not visible on diagram)
The ergonomically designed receiver boasts 5 independent channels, with different
LEDs to indicate which channel is active. The receiver can therefore receive signals from up to 5 different transmitters. The standard system comes with five different coloured LEDS (Red, White, Blue, Green & Orange).
An all blue LED system is also available.