The ATT Car Pager
The ATT Car Pager is an add-on that extends the V2 ATTx Receiver to include motor vehicle intrusion detection functionality.
This is accomplished by installing a car pager unit in your vehicle which interfaces with the ATTx V2 Receiver.
The ATT Pager Unit can also be interfaced to existing car alarms or used with the ATT Ultasonic Sensors. The sensors come in two variations, either a pillar-mounted sensors or dashboard-mounted sensors.
To complement the pager unit, we have developed a Mini Receiver for non-fishing situations. The receiver incorporates visual, vibrating and audible warnings.
Car Pager Operation
The unit is activated when your car door is opened. Once triggered the pager unit will transmit signals to the ATTx V2 receiver which sends the receiver into 'Alarm Mode'.
The unit will transmit the signals three times, then pause for an hour, then re-transmit the signals again after an hour. This process is repeated until the pager unit is reset. Turning on the vehicle ignition will reset the pager unit.
If the optional Ultrasonic Sensors are fitted the pager will also be triggered if your your vehicle window is smashed.
ATTx Receiver Alarm Mode
The receiver will continuously emit a siren-like tone lasting for 5 seconds with as well as flashing all the LEDs simultaneously. To stop the siren tone (and cancel Alarm Mode) tap the receiver button once. The receiver will revert back to it's normal mode of operation.
The ATT Pager Unit can also be interfaced to existing car alarms or used with the ATT Ultasonic Sensors. The sensors come in two variations, either a pillar-mounted sensors or dashboard-mounted sensors.
To complement the pager unit, we have developed a Mini Receiver for non-fishing situations. The receiver incorporates visual, vibrating and audible warnings.
Car Pager OperationThe unit is activated when your car door is opened. Once triggered the pager unit will transmit signals to the ATTx V2 receiver which sends the receiver into 'Alarm Mode'.
The unit will transmit the signals three times, then pause for an hour, then re-transmit the signals again after an hour. This process is repeated until the pager unit is reset. Turning on the vehicle ignition will reset the pager unit.
If the optional Ultrasonic Sensors are fitted the pager will also be triggered if your your vehicle window is smashed.
ATTx Receiver Alarm ModeThe receiver will continuously emit a siren-like tone lasting for 5 seconds with as well as flashing all the LEDs simultaneously. To stop the siren tone (and cancel Alarm Mode) tap the receiver button once. The receiver will revert back to it's normal mode of operation.
Mini Receiver Operation
When triggered by the Car Pager, the Mini Receiver is activated and will vibrate and beep 5 times.
Pressing the "L" button on the receiver will de-activate the receiver for 15 minutes. After the 15 minute period the receiver will be re-activated and continue normal use.
The installation of the ATT Car Pager and its associated components does not contribute to a vehicles insurance grouping, regardless of whether it is fitted by a certified company belonging to the Vehicle Systems Installation Board (VSIB).
The ATT Car Pager is not categorised as an anti-theft device or deterrent according to the Motor Insurance Repair Research Centre (MIRRC) or the Association of British Insurers (ABI) categorisation systems.
ATT will not be held responsible or liable for any claims arising from fitting of the ATT Car Pager System to a vehicle or through the provision of incorrect information to insurance companies regarding the fitting of the ATT Car Pager system.
Fitting of all ATT devices to motor vehicles are at the owner’s risk.
The ATT Car Pager is not categorised as an anti-theft device or deterrent according to the Motor Insurance Repair Research Centre (MIRRC) or the Association of British Insurers (ABI) categorisation systems.
ATT will not be held responsible or liable for any claims arising from fitting of the ATT Car Pager System to a vehicle or through the provision of incorrect information to insurance companies regarding the fitting of the ATT Car Pager system.
Fitting of all ATT devices to motor vehicles are at the owner’s risk.